Cross partition ring filler is developed based on the increase in the specific surface area of the filler, thus enhancing mass transfer efficiency. Its shape is in the middle of the Raschig rings additional cross separator. In general, this filler due to the larger size, and applies only to the overall stuffing, and generally only as random packing bottoms supporting distribution layer.
ø80-150mm specifications Cross spacer ring can be used as the support material, the porosity is greater than 60%, the number for the entire polymerization number.
|
Spec. |
D*H*T(mm) |
Surface area (m²/m³) |
Free volume (%) |
Number per m³ |
Bulk density (Kg/m³) |
Dry Packing Factor (m-1) |
|
Ø 50 |
50*40*50*5 |
145 |
50 |
6400 |
600 |
565 |
|
Ø 80 |
80*64*80*8 |
120 |
56 |
1950 |
820 |
356 |
|
Ø100 |
100*80*100*10 |
110 |
53 |
1000 |
850 |
252 |
|
Ø120 |
120*96*120*12 |
75 |
55 |
370 |
860 |
146 |
|
Ø150 |
150*120*150*15 |
60 |
58 |
295 |
980 |
101 | |
